Thanks ahead of time. I will keep trying to figure this out while you lend me a hand. THANKS!

What's the code look like to logon to a VPN where it asks me to supply a User name and Password so when I run the VB.NET application below which in turns runs a Crystal Report it will not give me the error:
Logon failed.

It's probably only one or two lines of code that I need.

Public Class Form4
    Inherits System.Windows.Forms.Form

#Region " Windows Form Designer generated code "

    Public Sub New()
        MyBase.New()

        'This call is required by the Windows Form Designer.
        InitializeComponent()

        'Add any initialization after the InitializeComponent() call

    End Sub

    'Form overrides dispose to clean up the component list.
    Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
        If disposing Then
            If Not (components Is Nothing) Then
                components.Dispose()
            End If
        End If
        MyBase.Dispose(disposing)
    End Sub

    'Required by the Windows Form Designer
    Private components As System.ComponentModel.IContainer

    'NOTE: The following procedure is required by the Windows Form Designer
    'It can be modified using the Windows Form Designer.  
    'Do not modify it using the code editor.
    Friend WithEvents Button2 As System.Windows.Forms.Button
    Friend WithEvents Button1 As System.Windows.Forms.Button
    Friend crViewer As CrystalActiveXReportViewerLib11.CrystalActiveXReportViewerClass
    Friend WithEvents AxCrystalActiveXReportViewer1 As AxCrystalActiveXReportViewerLib11.AxCrystalActiveXReportViewer
    <System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
        Dim resources As System.Resources.ResourceManager = New System.Resources.ResourceManager(GetType(Form4))
        Me.Button2 = New System.Windows.Forms.Button
        Me.Button1 = New System.Windows.Forms.Button
        Me.AxCrystalActiveXReportViewer1 = New AxCrystalActiveXReportViewerLib11.AxCrystalActiveXReportViewer
        CType(Me.AxCrystalActiveXReportViewer1, System.ComponentModel.ISupportInitialize).BeginInit()
        Me.SuspendLayout()
        '
        'Button2
        '
        Me.Button2.Location = New System.Drawing.Point(415, 576)
        Me.Button2.Name = "Button2"
        Me.Button2.TabIndex = 7
        Me.Button2.Text = "Continue"
        '
        'Button1
        '
        Me.Button1.Location = New System.Drawing.Point(503, 576)
        Me.Button1.Name = "Button1"
        Me.Button1.TabIndex = 8
        Me.Button1.Text = "Cancel"
        '
        'AxCrystalActiveXReportViewer1
        '
        Me.AxCrystalActiveXReportViewer1.Enabled = True
        Me.AxCrystalActiveXReportViewer1.Location = New System.Drawing.Point(16, 16)
        Me.AxCrystalActiveXReportViewer1.Name = "AxCrystalActiveXReportViewer1"
        Me.AxCrystalActiveXReportViewer1.OcxState = CType(resources.GetObject("AxCrystalActiveXReportViewer1.OcxState"), System.Windows.Forms.AxHost.State)
        Me.AxCrystalActiveXReportViewer1.Size = New System.Drawing.Size(960, 544)
        Me.AxCrystalActiveXReportViewer1.TabIndex = 9
        '
        'Form4
        '
        Me.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
        Me.ClientSize = New System.Drawing.Size(992, 614)
        Me.Controls.Add(Me.AxCrystalActiveXReportViewer1)
        Me.Controls.Add(Me.Button1)
        Me.Controls.Add(Me.Button2)
        Me.Name = "Form4"
        Me.Text = "BayForce Technology Solutions"
        CType(Me.AxCrystalActiveXReportViewer1, System.ComponentModel.ISupportInitialize).EndInit()
        Me.ResumeLayout(False)

    End Sub

#End Region
    Dim crxApplication As New CRAXDRT.Application
    Public oReport As CRAXDRT.Report
    Public cboRpt1, cboRpt2 As String
    Public start_date, end_date As String

    Private Sub Form4_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load

        If cboRpt1 = 0 And cboRpt2 = 0 Then
            oReport = crxApplication.OpenReport("C:\Documents and Settings\BayForce\My Documents\Crystal Reports\emsub.rpt", 1)
            oReport.ParameterFields.Item(1).AddCurrentValue(CDate(F1.TextBox2.Text))
            oReport.ParameterFields.Item(2).AddCurrentValue(CDate(F1.TextBox3.Text))
        ElseIf cboRpt1 = 0 And cboRpt2 = 1 Then
            oReport = crxApplication.OpenReport("C:\Documents and Settings\BayForce\My Documents\Crystal Reports\emsub.rpt", 1)
            oReport.ParameterFields.Item(1).AddCurrentValue(CDate(F1.TextBox2.Text))
            oReport.ParameterFields.Item(2).AddCurrentValue(CDate(F1.TextBox3.Text))
        ElseIf cboRpt1 = 0 And cboRpt2 = 2 Then
            oReport = crxApplication.OpenReport("C:\Documents and Settings\BayForce\My Documents\Crystal Reports\emsub.rpt", 1)
            oReport.ParameterFields.Item(1).AddCurrentValue(CDate(F1.TextBox2.Text))
            oReport.ParameterFields.Item(2).AddCurrentValue(CDate(F1.TextBox3.Text))
        ElseIf cboRpt1 = 1 And cboRpt2 = 0 Then
            oReport = crxApplication.OpenReport("C:\Documents and Settings\BayForce\My Documents\Crystal Reports\emsub.rpt", 1)
        ElseIf cboRpt1 = 1 And cboRpt2 = 1 Then
            oReport = crxApplication.OpenReport("C:\Documents and Settings\BayForce\My Documents\Crystal Reports\emsub.rpt", 1)
        ElseIf cboRpt1 = 1 And cboRpt2 = 2 Then
            oReport = crxApplication.OpenReport("C:\Documents and Settings\BayForce\My Documents\Crystal Reports\emsub.rpt", 1)
        ElseIf cboRpt1 = 1 And cboRpt2 = 3 Then
            oReport = crxApplication.OpenReport("C:\Documents and Settings\BayForce\My Documents\Crystal Reports\emsub.rpt", 1)
            oReport.ParameterFields.Item(1).AddCurrentValue(CDate(F1.TextBox2.Text))
            oReport.ParameterFields.Item(2).AddCurrentValue(CDate(F1.TextBox3.Text))
        ElseIf cboRpt1 = 1 And cboRpt2 = 4 Then
            oReport = crxApplication.OpenReport("C:\Documents and Settings\BayForce\My Documents\Crystal Reports\emsub.rpt", 1)
            oReport.ParameterFields.Item(1).AddCurrentValue(CDate(F1.TextBox2.Text))
            oReport.ParameterFields.Item(2).AddCurrentValue(CDate(F1.TextBox3.Text))
        ElseIf cboRpt1 = 2 And cboRpt2 = 0 Then
            oReport = crxApplication.OpenReport("C:\Documents and Settings\BayForce\My Documents\Crystal Reports\emsub.rpt", 1)
        ElseIf cboRpt1 = 2 And cboRpt2 = 1 Then
            oReport = crxApplication.OpenReport("C:\Documents and Settings\BayForce\My Documents\Crystal Reports\emsub.rpt", 1)
        ElseIf cboRpt1 = 2 And cboRpt2 = 2 Then
            oReport = crxApplication.OpenReport("C:\Documents and Settings\BayForce\My Documents\Crystal Reports\emsub.rpt", 1)
        ElseIf cboRpt1 = 2 And cboRpt2 = 3 Then
            oReport = crxApplication.OpenReport("C:\Documents and Settings\BayForce\My Documents\Crystal Reports\emsub.rpt", 1)
        ElseIf cboRpt1 = 2 And cboRpt2 = 4 Then
            oReport = crxApplication.OpenReport("C:\Documents and Settings\BayForce\My Documents\Crystal Reports\emsub.rpt", 1)
        ElseIf cboRpt1 = 2 And cboRpt2 = 5 Then
            oReport = crxApplication.OpenReport("C:\Documents and Settings\BayForce\My Documents\Crystal Reports\emsub.rpt", 1)
        End If

        crViewer.ReportSource = oReport
        crViewer.ViewReport()
    End Sub

    Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
        Me.Hide()
        F1.Show()
    End Sub

    Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
        Me.Hide()
    End Sub
End Class