Also Dan, What seemed to help for us and I dont know if
this is possible for you to do but...

We instaleld Windows NT 4 SP3 Dual Boot on out Development machine,
and installed ONLY VFP 6 onto the Windows NT OS. We made the
disks off of that and now all options for Disks works.
we tested the Diskettes on Win 95, 98 and NT (3 Seperate Machines)
and all worked fine. We go back to the Windiws 95 portion of
the Dual-Boot Machine, make the disks, and it pukes...

So I think it is something that we have installed along with
VFP 6 that is messing things up...

Please let me know anything you find out!
Thanx! Bob


>I'm sorry. I did a compressed (Internet) setup, not a network (uncompressed) setup. I'll have to give that a try!
>
>>Mine won't even run that way, I have tried it!
>>
>>>Excuse my enthusiasm but FINALLY! Someone has the same problem that
>>>I have been having since Sept 3rd... What you'll also find is
>>>that the diskettes you created on your hard drive will work
>>>flawlessly if executed from the Hard Drive, but wont work
>>>when installed onto the diskettes. We had to make a NETSETUP
>>>and distribute the APP on CD's until someone can help us with
>>>this problem. Please let me know if you find out anything,
>>>I have been pulling my hair out for a month on this one!
>>>
>>>Thanx!
>>>Bob :-)
>>>
>>>>I am using VFP 6.0 to create and distribute an application. After running the Setup Wizard, which completed without errors, I copied the disk images to diskettes.
>>>>
>>>>When I run SETUP.EXE on disk 1 I get the following error: Setup cannot access the required initialization file: 'SETUP1.CAB: ACMSETUP.EXE: ACMSETUP.HLP: MSSETUP.DLL: MSVCRT40.DLL: MSVCRT.DLL: WIZSET32.DLL'
>>>>
>>>>I have tried this with several different diskettes so I know it is not a bad diskette. I have also removed and re-installed VFP 6.0. This did not help either.
>>>>
>>>>In looking at the generated files, I can open the SETUP1.CAB file. However, there are 10 files that do not have a filename (just '||' displays as the filename) in the CAB. Also, there are several areas in SETUP.INF that look suspect, black boxes where file names are supposed to appear. Here is one section that shows this. The square boxes appear in the "AcmsetupEXE", AcmsetupHLP" and others.
>>>>
>>>>[Setup]
>>>>"SetupIni"=1,SETUP.INI,,,,1998-04-24,!DECOMPRESS,,OLDER,,,SETUP.INI,,,,149,,,,,
>>>>"AcmsetupExe"=1,,,,,1998-05-11,,,OLDER,,,,,,,371200,,,,,
>>>>"AcmsetupHlp"=1,,,,,1998-04-24,,,OLDER,,,,,,,14490,,,,,
>>>>"SetupTdf"=1,SETUP.TDF,,,,1998-04-24,!DECOMPRESS,,OLDER,,,SETUP.TDF,,,,84,,,,,
>>>>"MssetupDll"=1,,,,,1998-04-24,,,OLDER,,,,,,,283136,,,,,
>>>>"Wizset32Dll"=1,,,,,1998-04-24,,,OLDER,,,,,,,60928,,,,,
>>>>"OdbcstfDll"=1,ODBCSTF.DLL,,,,1998-06-22,!DECOMPRESS,,OLDER,,,ODBCSTF.DLL,,,,28672,,,,3.510.3002.1,
>>>>"OdbckeyInf"=1,ODBCKEY.INF,,,,1998-05-31,!DECOMPRESS,,OLDER,,,ODBCKEY.INF,,,,3281,,,,,
>>>>"SetupExe"=1,SETUP.EXE,,,,1998-04-24,!DECOMPRESS,,OLDER,,,SETUP.EXE,,,,74192,SYSTEM,,,,
>>>> 1,SETUP.STF,,,,1998-10-04,!DECOMPRESS,,OLDER,,,SETUP.STF,,,,3918,,,,,!VITAL
>>>> 1,,,,,1998-10-04,,,OLDER,,,SETUP.LST, ,,,1183,,,,,!VITAL
>>>> 1,SETUP.INF,,,,1998-10-04,!DECOMPRESS,,OLDER,,,SETUP.INF,,,,15499,,,,,!VITAL