Hi Marcus,

Just received your msgs, thanks for the help. I will try the reset. Unfortunately the company uses HP printers almost exclusively. I found that the problems arise with the HP4000T. The old HP4 seems fine. The problem also occurs when the user's default printer is the HP4000T. Do you know if the problem has been addressed with MicroSoft?

Thanks again,
Ashley

>>>>Help!
>>>>I have an multiuser application in VFP6 in a Novell 4.01 environment running on PCs with Windows 95b installed. Most PCs seem to run the application fine, 3 so far lockup (require power off/on) whenever they go through about three iterations of executing a module which prints a report. They typically lockup at the menu selection and never on the first try. I have reinstalled Windows and the application from the ground up and that has not cured the problem.
>>>>Any suggestions, anyone?
>>>>
>>>>TIA
>>>Ashley,
>>>Check the printer drivers they're using. Some HP and Epson are known to be problematic. Try to use drivers that ship with win.
>>>Cetin
>>
>>There are some problems iwth HP printer drivers which may be affecting your app. Do a search in KB articles for _FPRESET(). As article indicates, you should add 2 lines of code after calls which use printer drivers (e.g., REPORT FORM).
>
>Make sure you really test it on a couple of reports. I thought it worked, put it everywhere and now realized I still have the same problem. The only solution I've found is removing the HP drivers!
>Marcus.