FoxPro 2.0 /Extended uses its own DOS extender which is not compatible with MS's EMM386. You have to boot your machine with it not loaded for FOXPROX to run.

What I had to do on my old 386 was create a boot menu in CONFIG.SYS. If I wanted to run FOXPROX, I would reboot, then select that boot option. Otherwise, it would boot regularly with EMM386.

HTH.

>Hi:
>
>I have a computer with 64 MB of memory. When I start FoxPro DOS 2.0--FOXPROX--I get the following message.
>
>os386:Expected page to be present
> CR2 = 0020 2000 CR3 = 0214 F000
> CR2 [Dir Page Offset] = [0000 0201 0000]
> CS:EIP = 000F 0000 0000
>Interrupt 0E at CS:EIP=000F:00000000
>....... address and register dump
>
>
>I have tried running MEMMAKER with no change, and all possible options using EMM386 in the CONFIG.SYS--For example:
>
>DEVICE=C:\DOS\EMM386.EXE 4096
>DEVICE=C:\DOS\EMM386.EXE 4096 RAM
>DEVICE=C:\DOS\EMM386.EXE 4096 HIGHSCAN
>
>None of these work.
>
>If I try:
>DEVICE=C:\DOS\EMM386.EXE 4096 NOEMS
>I get: Incompatible memory manager
>
>Does anybody have some new ideas that I can try?
>
>Thanks!
>
>--Paul