Information générale
Titre:
SyQuest EZ135 parallel port problems
In Windows NT 3.51 I am having trouble with an EZ135 parallel port drive attached to LPT1 (I/O address 378) interfering with a printer on LPT2 (I/O address 278). When the EZ135 PP drive is not connected the printer on LPT2 works just fine.
In Event Viewer I get the following error messages and event details:
Source: Parport, EventID: 22
Details:
A conflict has been detected between two drivers which claimed two overlapping Io port regions. Driver Parport, with device <\Device\ParallelPort0.Translated>, claimed an IO port range with starting address in data address 0x28 and 0x2c, and length in data address 0x30.
Source: Parport, EventID: 22
Details:
A conflict has been detected between two drivers which claimed two overlapping Io port regions. Driver epathdx, with device <\Device\ScsiPort1.Translated>, claimed an IO port range with starting address in data address 0x28 and 0x2c, and length in data address 0x30.
Source: Parport, EventID: 5
Details:
The hardware addresses for are already in use by another device.
Source: Parport, EventID: 21
Details:
Unable to get device object pointer for port object.
My system is a 486 DX4 100 Mhz, (AMI BIOS, Not PNP and ports are not configurable from the BIOS), with 40 Mb RAM, two ECP parallel ports.
David Kolb
Suivant
Répondre
Voir le fil de ce thread
Voir le fil de ce thread à partir de ce message seulement
Voir tous les messages de ce thread
Voir tous les messages de ce thread à partir de ce message seulement