>Hi!
>
>Take a look to the MSDN. There is an article somewhere about the optimizing the speed of application. Certain VFP settings have a significant influence on the VFP program running speed. I did read the article, made these settings as default for development mode and forget. I can find it again and post the exact list of commands.
>
>As about the form, it is a simple VFP form just created, 2 comboboxes with the 'Value' row source typoe and some values list in row source, and a shape with a click code. Than put a button, added a code posted here and ran. Memory increased just from the first SetAll call, but than no increases over the entire loop. Increase was ~512 bytes and reduces by ~64 bytes after sys(1104) command use. So, is that 512 additional bytes a problem?
Hi Vlad,
would be nice to have MSDN's article.
No, the additional Bytes are not a problem to me, if it works like yours or with mine classes. The question is, why those leakage on others? Simple to avoid the problem. Anyway, some customers like to have the one form of the one application open for decades, even 1/2KB may add up to MB.
Lutz
Précédent
Suivant
Répondre
Voir le fil de ce thread
Voir le fil de ce thread à partir de ce message seulement
Voir tous les messages de ce thread
Voir tous les messages de ce thread à partir de ce message seulement