That's the same thing that Steve Gibson had me try with clearing out those properties and fields. Clearing those fields doesn't seem to make a difference. I don't have a property in the Expr field call PaperLength. This is what I do have

DRIVER=
DEVICE=
OUTPUT=
ORIENTATION=0
PAPERSIZE=48
DEFAULTSOURCE=15
YRESOLUTION=180
TTOPTION=2
COLLATE=0

I set the papersize based on options that I have from the printer driver. All are fixed width and height.

The options that I have are:

6 in Page 3.14 x 6 in
A4 Length 80x297mm
B5 Length 80x257mm
Executive Length 3.14 x 10.5 in
Letter Length 3.14 x 11 in
Receipt Length 80 x 3276mm
Reserved48
Reserved49

I've tried them all, both setting them as default for the printer and on the report. And also trying them as the default for the printer, with the blank entries from above.

>If you modify the report, you can click on File, Page Setup. Then click the Print Setup button. You can select a user defined size for your report there. OK out of all that and save the report [you may want to do this on a copy of the report because you can trash it real easy this way].

>Next open the report - use myrepo.frx. Look in Expr field. Their you will see the properties you need to manipulate. Delete the DRIVER, DEVICE and OUTPUT lines. Replace the TAG and TAG2 fields with nothing.

>How did you set the length in the first place?

>Is there a PaperLength property or is it called PaperSize. I'm using a windows driver for a receipt printer, so I think some properties aren't showing up and I may need to add them.