Hi all, I've had the same problems with USB printers and FPD26 in Win95/98, W2k, and WXP. I have not been able to resolve the problem even with redirecting using the 'net use' command. Did this resolve the issue for you Plinio?
Tracy

>>Hi all
>>One of my clients chaged his printer. The old one was HP 610 printing to serial port.
>>
>>His new printer is a HP Deskjet 656c. When he tryes to print it send "printer no ready message"
>
>FPW should be able to print to it OK so I assume you're talking about FPDOS.
>
>If the printer has no on-board processor and memory then its print jobs are actually rendered on the PC via its printer driver. This is a so-called "GDI" printer. Most inkjets, and low-cost laser printers are in this category. They are not able to support print jobs coming from DOS at all.
>
>Assuming it's not a GDI printer, USB printers aren't on a standard port that FPDOS recognizes (PRN, COM or LPT) so you need to redirect one of the standard ports to the USB printer. First make sure you give/rename the installed printer a short name with no spaces (8 chars or less) like "HP656C". If your computer's NetBIOS name is, say, "PC1" you can then redirect a standard port to this printer as follows:

NET USE LPT1: \\PC1\HP656C

You then print to LPT1 in your application and the job gets redirected to the printer.
>
>I just checked HP's site - it does not say it support DOS but at US$50 I suspect it is a GDI printer.