Hemant,

i know second way for this,

first one,

1-create map path (such as K: ) on each client pc to use your program
2-create dir on each client pc and copy your exe to them on the network
3-create config.fpw file such as notepad and write below codes to this file then save and copy it to each client pc on the network

tmpfiles=GETENV("windir")+"\temp" && this codes improve the performance
editwork=GETENV("windir")+"\temp" && this codes improve the performance
sortwork=GETENV("windir")+"\temp" && this codes improve the performance
progwork=GETENV("windir")+"\temp" && this codes improve the performance
default=K:\your_program_data_path 

4-copy only the program data's to K:\your_program_data_path

second one

1-first 4 step is valid this way only remark the "default=K:\your_program_data_path" line with && or * at config.fpw file
2-and additional create pathcont.dbf , datadir c(100) insert a blank record and replace datadir value with "K:\your_program_data_path" and copy this file to the each client pc on the network
3-at the top of your start.prg (which is your marked Set Main on your project) use below codes

IF ! USED("pathcont")
 use pathcont in 0 shared 
   if empty(pathcont.datadir)   
messagebox("Cannot Continiue data path was empty ,please input path info !",16,"ERROR")
do form form\pathset  && create a form for input this info or use browse command for this
ELSE
   	select pathcont
 set path to (pathcont.datadir) 
*	do FORM form\login &&start  
		do start  
ENDIF
   ENDIF 

i am using second way and there is no problem

HTH

PS : if there is not runtime files on clientd pc's you'll get error