Thanks Nigel.

I'll let you know what I find.

Cheers,

JimN

>Jim,
>
>I'm home now and here are the settings on my w95 machines - these are the settings I religiously check on all my PCs.
>
>In network on control panel I have:
>Client for Microsoft Networks
>Client for Netware Networks (installed for NT)
>Dial-Up Adapter
>PCI Ethernet Adapter
>IPX/SPX-compatible Protocol->PCI Ethernet Adapter
>NetBEUI -> PCI Ethernet Adapter
>TCP/IP -> Dial-Up Adapter
>
>In the properties for IPX/SPX, I NEVER check the NetBIOS box!!
>In the advanced page;
>Frame Type=Ethernet.802.3
>Network Address - different for each PC
>Source Routing - 16 entry cache
>On the NIC properties - NETBEUI is set as default protocol.
>
>If this is all in order, give the cable a definite try!
>
>>Hi Nigel,
>>
>>Yes, I am gaining more and more hope that it *is* the cable/connection and will be replacing both tonight.
>>
>>I have, *at time* been able to 'identify' the problem machine from other machines but subsequent attempts to access info on it returned with cannot access message. What you say on that makes sense to me.
>>
>>Yes, the machine can see itself. Just no others. All have same WorkGroup name. Other two machines see each other just fine, all around.
>>
>>I suppose the fact that I am *not* NT makes this a tad different from your situation, though the cable would surely be a commonality!
>>
>>Will let you know how it goes with new cable.
>>
>>Cheers and thanks,
>>
>>Jim N
>>