My ZA is 4.? so I should not have the problem. And I will follow your suggestions. Thank you very much for your help.
>Supposedly this was fixed in versions 2.6 of ZoneAlarm and higher:
>
>
http://support.microsoft.com/default.aspx?scid=kb;en-us;285549>
>Zonealarm recommends:
>
>Step 1: Open the ZoneLabs product and select "Program Control".
>
>Step 2: Click on the "Programs" Tab.
>
>Step 3: The VPN Client's Access permission is a "?". Click under "Trusted" and select "Allow". The question mark changes to a check mark.
>
>Step 4: Reboot the PC.
>
>When the PC boots back up, the VPN client should operate normally.
>
>
>The problem I found is ZoneAlarm blocking something. I am trying to find out what and where in ZA I should specify to make it let me use VPN.
>>
>>
>>>A customer gave me VPN CD, User Name, Password. I successfully connect to their network (at least I think so since connection is shown and I can get to their intranet homepage).
>>>
>>>Then I want to try to map one of their servers to my drive and I can't. Here is what I do: I open Windows Explorer (via My Comptuter), Tools | Map Network drives. In the Folder field I enter \\tstlab1\c$ (which is what the client told me) but I get message:
>>>"The network path \\tstlab1\c$ could not be found."
>>>
>>>Assuming that they gave me the right user name and password and that such server (tstlab1) exist, what could I be doing wrong?
>>>
>>>Thank you.
"The creative process is nothing but a series of crises." Isaac Bashevis Singer
"My experience is that as soon as people are old enough to know better, they don't know anything at all." Oscar Wilde
"If a nation values anything more than freedom, it will lose its freedom; and the irony of it is that if it is comfort or money that it values more, it will lose that too." W.Somerset Maugham